Axis 7100 Скачать руководство пользователя страница 64

Страница: 64 / 181

Configuring the AXIS 7100

AXIS 7100 User’s Manual

Note:

With reference to the table below, select the amount of

information to be included with the image:

Specify the name or IP address of the FTP server on which the

scanned image will be stored in the FTP Server field.

Specify the user name for logging on to the FTP server in the

User field.

Note:

If required, specify the password for logging on to the FTP

server. Repeat the password in the Confirm field to check the

spelling and syntax.

Specify the directory on the FTP server where the image will

be stored.

Define the file name of the scanned image.

The user can specify another profile from the AXIS 7100 control panel at
the moment of scanning. <Default-xx> is the default value specified on
the Destination Defaults page.

Option

Description

<Default-xx>

Default value specified on the Destination Defaults page

<Complete>

Information about the AXIS 7100, the connected digital copi-
er/scanner, the parameter settings used when scanning etc.

<Basic>

Includes the image-related profile settings

<None>

Does not include any information

Leaving the User field blank causes the user and password defined in the
Destination Defaults page to be used.

Содержание 7100






















































































































































































Результаты поиска

Содержание 7100

Отзывы:

Axis 7100, Руководство пользователя, Страница: 64 / 181

Результаты поиска

Содержание 7100

Отзывы: