Axis 7100 Скачать руководство пользователя страница 165

Страница: 165 / 181

AXIS 7100

User’s Manual

The Parameter List

165

[Printing]

Specifies the printing parameters.

PrintingEnabled

=yes

Specifies if printing is enabled

LPDEnabled

=yes

Specifies if printing over LPD is enabled

RevtelEnabled

=yes

Specifies if printing over Raw TCP is enabled

[Destinations]

Specifies the available destinations.

Clear List First

=no

Destinations

= x

Specifies the number of destinations defined in
the AXIS 7100.

Destination0

Destination name

Specifies the name of the destination

[Destination-name(FTP)]
Description

=Descriptive name

Specifies the name of the file destination. This is
the name that will appear in the destination list
on the AXIS 7100 message display.

Transfer method

=Scan-to-file (FTP)

Specifies how the scanned image should be
sent; that is by which protocol.

Destination

=Directory

Defines the directory for Scan-to-file (FTP)

Profile

=Text

Server

=ftp.axis.se

Specifies the name or IP address of the FTP
server that holds the file.

User

=name

Specifies the name used to log on to the server.

Password

=*****

Specifies the password used to log on.

File name

=FTPImage

Specifies the name of the file.

Index file

=no

Defines the option to store the sequence
number on the FTP server.

[Destination-name(URL)]
Description

=name(URL)

Specifies the name of the destination (URL).
This is the name that will appear in the
destination list on the AXIS 7100 message
display.

Transfer method

=Scan-to-URL (SMTP & FTP) Specifies how the scanned image should be

sent; that is by which protocol.

Destination

[email protected]

Defines the E-mail address of the e-mail
recipient (SMTP).

[Destination-printer]
Description

=printer

Specifies the name of the printer. This is the
name that will appear in the destination list on
the AXIS 7100 message display.

Transfer method

=Scan-to-print (LPD)
Scan-to-print (TCP)
Scan-to-RightFax (LPD)

Specifies how the scanned image should be
sent; that is by which protocol.

Destination

=Printer Queue

Defines the print queue for scan to print (LPD).

Parameter name

Value

Description

Содержание 7100






















































































































































































Результаты поиска

Содержание 7100

Отзывы:

Axis 7100, Руководство пользователя, Страница: 165 / 181

Результаты поиска

Содержание 7100

Отзывы: