Axis 7100 Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 181

Axis 7100 Скачать руководство пользователя страница 74

Configuring the AXIS 7100

AXIS 7100 User’s Manual

74

Services Overview

The table below provides an overview of the information and

services provided by each button on this page

Creating and Editing

Profiles

Follow the instructions below to edit the existing profiles or

create new profiles for specific document types such as invoices,
mailings etc.

Click

to create a copy of an existing paper size. You can

edit the settings to create a new paper size based on existing

settings.

Notes:

Button

Description

Profile New>>

Allows an administrator to create a new profile. See Creat-
ing new profiles below.

Profile Defaults>>

Allows the administrator to set the default paper size to be
used for all profiles using the default.

Restore Predefined
Profiles

The AXIS 7100 includes a number of predefined general pur-
pose profiles. Clicking this button restores the predefined
profiles. See Predefined Profiles below for details.

Note: all user-defined profiles are lost if you restore the pre-
defined profiles. This does not apply to Default Paper SIze
which must be set manually from admin | Profiles .

• When you have selected a new language you must go to the

Profiles

page and click

Restore Predefined Profiles

to change the lan-

guage in the Profiles list. It is recommended that you select your pre-
ferred language before defining and modifying paper sizes and
profiles.

Note: All user-defined profiles (except the set default paper size) and
modifications to predefined profiles will be lost when you click

Restore

Predefined Profiles

.

• The AXIS 7100 will display an error message if the selected settings

combination is not valid as some combinations of settings are incom-
patible.

«
...
72
73
74
75
76
...
»

Содержание 7100






















































































































































































Отзывы:

Нет отзывов