Operation instructions | MK 8-0x | MK 16-0x | MK 8-2x | MK 8-0xN | MK 12-0xN
12
2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
2.
Mounting and Installation
The compact headend can be mounted on either at the wall or be mounted in a 19 "rack.
Installation must be performed by authorized and skilled electricians only.
The headend must only be operated indoors.
Before mounting and installation, pull the mains plug (1)!
The antenna system must be installed and grounded according to the EN 60728-11 standard.
Install the device in compliance with the safety regulations defined by the EN 60728-11 standard.
2.1.
Wall mounting of MK 8-0x, MK 16-0x and MK 8-2x
The compact headend are factory-fitted with wall brackets.
Notes:
•
The unit must be wall mounted with at least 5 cm clearance along the 4 sides.
•
The head units can be mounted horizontally or vertically on the wall. For horizontal mounting, the
connections must be on the top, for vertical mounting on the right.
The installation must be carried out on an even and vertical surface (any unevenness must be
compensated).
Fix the headend with minimum four pcs. of 4 × 30 mm screws (2).
