2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
35
4.2.11.
"Freeze" NIT version
If programs of a transponder change, then the NIT is recreated. In most countries, the end user does not notice,
because the receivers automatically read in the new NIT. However, in some countries (eg France) end users are
asked to start a channel search.
If it comes to the case that one or more stations are weak to receive, then the NIT changes frequently and the
end users are always unnecessarily prompted to start a channel search. In this case, the NIT version can be
"frozen" (recommended for use in France).
In PHASE 2 click on ADVANCED OPTIONS.
A dialog with options will open.
Open the
NIT
option.
Under NIT version, select Fixed.
Enter a version between 1 and 31.
Note:
If the station list really changes, the channel search must be done manually.
You can obtain extended options for editing the NIT with the software extension MKS 1-00 (see 5.8 auf Seite
55)
4.2.12.
OTA upgrade (add non-referenced PIDs)
To enable an
Over-the-Air
upgrade, non-referenced PIDs can be manually added to the output modulators.
Notes:
•
The function requires a valid license for “PID-Filtering” (see 5.10 on page 60).
•
In PHASE 1 a transport stream must already be selected which contains the unreferenced PIDs.
Click in PHASE 2 on ADVANCED OPTIONS.
A dialog with options will open.
Open the
PIDs
option.
Under
Add unreferenced PIDs
, click the
green
plus sign
in the table header.
A line for entering the PID is inserted.
