Operation instructions | MK 8-0x | MK 16-0x | MK 8-2x | MK 8-0xN | MK 12-0xN
34
2022-07-27 | Technical improvements, changes in design, printing- and other errors reserved.
4.2.9.
EPG and EIT options
Electronic Program Guide (EPG)
Only possible in Remux mode: If a satellite makes the EPG available on a special transponder, then the tuner
receiving this transponder can be selected as the EPG input.
In PHASE 2 click on ADVANCED OPTIONS.
A dialog with options will open.
Open the
EIT
option.
Select the tuner in the EPG input box.
Special Packet Identifier (PID) for the Event Information Table (EIT)
The function is particularly relevant for multistreaming with DVB-T2. In some countries, the EIT is not
transmitted with PID 18 (for example, Israel PID 90). In this case, the headend can convert the PID into the
PID 18.
For tuners 1 to 8, 12 or 16, enter the PIDs used to transmit the EIT.
The entered PID of the EIT is then converted to PID 18.
4.2.10.
SDT table versions
The Service Description Table (SDT) contains information about the transmitted programmes (services). It is
usually transmitted with the PID 17. However, if the SDT is transmitted with a different PID, the headend can
change this other PID to PID 17.
In Phase 2 click on ADVANCED OPTIONS.
A dialog with options will open.
Open the
SDT
option.
The currently used SDT PIDs of the individual tuners are displayed (PID 17 ex works).
For tuners 1 to 8, 12 or 16, enter the PIDs used to transmit the SDT. Permissible values are 32 to 8190.
The entered PID of the SDT is then converted to PID 17.
