Axia DESQ, Инструкция по установке и эксплуатации

Страница: 29 / 80

2: I
np
ut
s a
nd O
ut
pu
ts •
1
9
©2012 Axia Audio
box, you’ll see a drop-down selector. Click on the
drop-down for output #3 and choose
to Analog 5
as
shown in Figure 2-6. By simply choosing
to Ana-
log 5
, QOR knows to deliver a backfeed that is a
mix-minus of Analog Input 5. (The output chosen to
deliver this backfeed is arbitrary - we chose Output 5
just for this example.)
4. Click
Apply
.
5. Now point your browser to the
GPIO Configu-
ration
screen (Figure 2-8). You may also use a GPIO
Node in lieu of QOR’ built-in GPIO ports; just point
your browser to that Node’s IP address instead.
6. The GPIO setup screen uses the same method
of assigning devices to ports as other Livewire de-
vices. Pick a port to map your Phone channel’s con-
tact closures to, using the list tool, and click
Apply
.
Figure 2-8 shows the GPIO section of a QOR (Axia
Element console s and GPIO nodes are similar, and
also have eight GPIO ports.)
The process is complete: you’ve made a Source Pro-
file for your phone hybrid, created a mix-minus, mapped
it to an audio output, and associated a GPIO port for con-
tact closures associated with the source.
What’s Next
When you’re ready, join us in Chapter 3: Console
Operation where we’ll show you how to use the various
controls of the DESQ and of the RAQ mixing surfaces.