Aviom A-16CS Скачать руководство пользователя страница 37

Страница: 37 / 93

Aviom A-16 Personal Monitor Mixing System

graphic above the two buttons on the front panel.

• When a Preset is saved, all sixteen Channel buttons will flash briefly

to confirm the Preset save operation.

• The

OLO

button has one LED. It will light when pressed, indicating

that the selected Channel or Group is now being auditioned with all

other Channels being muted.

• The

UTE

button has no LED in it. Pressing the

UTE

button with a

Channel selected will silence the Channel and cause the Channel’s

lower ( yellow) LED to light.

There is also one special button combination, the

ECALL

button followed by the

UTE

button. When used together this combination serves a twofold function:

• If there is a sudden change in the audio volume coming through the

monitor system, this button combination silences all audio channels

instantly.

• When starting from scratch to create a new mix, use this function

to set all sixteen channels to zero volume and all pans to the center

settings.

All Volumes Zero

Note

: The text on the right side of the label strip reads

“

In Recall Mode All Volumes Zero

”

as a reminder that this

function is always available.

Making Changes to Channel Settings

The A-16R Personal Mixer behaves in a similar manner to many popular digital mix-

ers. One set of common controls is used for editing. A simple convention is used: to

make a change to a Channel, first select it. Then the Channel is available for editing.

Содержание A-16CS






























































































Результаты поиска

Содержание A-16CS

Отзывы:

Похожие инструкции для A-16CS

Бренды по названию

Популярные бренды

Aviom A-16CS, Руководство пользователя

Результаты поиска

Содержание A-16CS

Отзывы:

Похожие инструкции для A-16CS

Бренды по названию

Популярные бренды