Aviom A-16 Personal Monitor Mixing System
64
or until another front panel button is pressed to exit MIDI mode. MIDI SysEx infor-
mation for other manufacturer’s devices will pass through the A-16R and be ignored.
To load an All Preset data file via SysEx:
1. Set the A-16R front panel Remote/Local switch to the
L
OCAL
position.
2. Press the
R
ECALL
button. The Recall button LED flashes.
3. Press the
S
OLO
button to arm the A-16R for MIDI reception. The LED
in the Solo button will blink.
4. Send the All Preset SysEx data file from your MIDI storage device.
5. The sixteen Presets are loaded into the A-16R internal memory
sequentially.
6. The Mute LEDs will serve as a progress bar. The LEDs will light in
order from 1 to 16 as each Preset is received successfully.
When the All Preset SysEx file transfer is complete, the system will display a status
message to confirm that the data was received properly. Two messages are possible:
• Valid Data Received - all yellow Mute LEDs will flash
• Invalid Data or MIDI Error - all red Channel LEDs will flash
Press any A-16R button to acknowledge the transfer status message and return the
A-16R to normal operation.
Exit MIDI Mode
You can exit an All Preset SysEx load operation by pressing any A-16R front panel
button, or by changing the position of the Remote/Local switch. Presets that have
been successfully received prior to exiting the SysEx recall mode will be preserved
in the internal memory of the A-16R. The remaining internal Preset memory of the
A-16R will remain unaltered.
Содержание A-16CS
Страница 6: ......
Страница 19: ...9 Rear Panel 1 2 3 1 DC power input 2 TRS Audio Inputs 3 TRS Audio Thru jacks ...