Aviom A-16CS Скачать руководство пользователя страница 47

Страница: 47 / 93

Aviom A-16 Personal Monitor Mixing System

light solid or flash.

• The

ECALL

button has one red LED. It flashes when the

ECALL

but-

ton is pressed, indicating that you can now select a Preset by touching

any numbered button.

• There is one LED in the

ROUP

button. When the

ROUP

button is

pressed, the LED flashes. This indicates that you can now build or edit

a Group.

• The

ECALL

and

ROUP

buttons will both flash when held down

simultaneously. This is the Save Mode, as indicated by the connecting

graphic above the two buttons on the front panel.

• When a Preset is saved, all sixteen Channel buttons will flash briefly

to confirm the Preset save operation.

• The

OLO

button has one LED. It will light when pressed, indicating

that the selected Channel or Group is now being auditioned with all

other Channels being muted.

• The

UTE

button has no LED in it. Pressing the

UTE

button with

a Channel selected will cause the Channel’s lower (yellow) LED to

light.

There is also one special button combination, the

ECALL

button followed by the

UTE

button. When used together this combination serves a twofold function:

• If there is a sudden change in the audio volume coming through the

monitor system, this button combination silences all audio channels

instantly.

• When starting from scratch to create a mix, use this function to set all

sixteen channels to zero volume and all pans to the center settings.

All Volumes Zero

Note

: The text on the right side of the A-16CS Control Surface reads

“

In Recall

Mode All Volumes Zero

”

as a reminder that this function is always available.

Making Changes to Channel Settings

A simple convention is used. To make a change to a Channel on the A-16CS Control

Surface, first select a Channel by pressing a numbered button. Then the Channel is

Содержание A-16CS






























































































Результаты поиска

Содержание A-16CS

Отзывы:

Похожие инструкции для A-16CS

Бренды по названию

Популярные бренды

Aviom A-16CS, Руководство пользователя

Результаты поиска

Содержание A-16CS

Отзывы:

Похожие инструкции для A-16CS

Бренды по названию

Популярные бренды