Aviom A-16CS Скачать руководство пользователя страница 67

Страница: 67 / 93

Aviom A-16 Personal Monitor Mixing System

the Group.

• Double-click the Channel buttons to include a Channel in the Group.
• Channels that are added to the Group will flash their upper red LED

to indicate that they are now part of the Group.

To Save your Group, simply press the

ROUP

button again. The Group LED goes out

and you are returned to your current Preset and live mix.
In the current Preset, you will now see all Channel LEDs associated with a Group

light whenever you press a Channel button that is included in your saved Group. The

Channels now behave as one.

Note

: Remember to save the Preset if you want to be able to recall the Preset with

the new Group settings later.

Creating Additional Groups

Three Groups can be created and saved in each Preset in a Personal Mixer. Each

Group can be created and/or edited as needed while live audio is playing through the

system.

The instructions in the previous section describe how to create and save the first

Group in a mix. Creating additional Groups follows the same procedure.

Use these steps to create a second and/or third Group.

• Select a Channel that is

not

currently part of an existing Group.

• Press the

ROUP

button to enter Group Mode. The Group LED will

flash.

• Double-click any Channels that you want to add to the Group.
• To save the Group, press the

ROUP

button again. The flashing LED

will go out.

Shortcut

: While in the Group edit mode, you can start the process of creating a new

Group while editing an existing Group. To do this,

• Press a Channel button that is

not

already part of the current Group

being edited. Its red LED will light solid.

•  Double-click Channels to add them to a new Group.
•  Create a third Group by following the same procedure.
•  Exit the Group edit mode to save the Groups.
•  Save the Preset.

If you try to create more than three Groups, the interface will automatically select

one of the existing Groups when you enter Group edit mode. You have the option at

this point to edit an existing Group or clear Channels that are part of one of the other

existing Groups.

Содержание A-16CS






























































































Результаты поиска

Содержание A-16CS

Отзывы:

Похожие инструкции для A-16CS

Бренды по названию

Популярные бренды

Aviom A-16CS, Руководство пользователя

Результаты поиска

Содержание A-16CS

Отзывы:

Похожие инструкции для A-16CS

Бренды по названию

Популярные бренды