Aviom A-16 Personal Monitor Mixing System
20
21
gain settings available. Changes to the input level on the A-16T front panel affect a
pair of channels at a time.
The four levels are +22dB, +4dB, 0dB, and -10dB. To select the proper Input Level
setting, choose the Input Level position that most closely matches the output of your
audio gear. Here are some examples to be used as a guide:
• Use the +22dB setting for the hottest signals such as those coming
from professional broadcast equipment, tape decks, and some digital
audio workstations (DAWs).
• The +4dB setting is the best choice for most professional audio gear
such as mixing boards, microphone preamps, effects processors, etc.
• Try the 0dB setting for musical instruments such as keyboards and
drum machines.
• The -10dB setting is appropriate for consumer audio devices such as
CD players and MP3 players. Also, semi-pro audio gear should use
the -10dB setting. (In many cases those devices use RCA jacks for
audio input and output.)
Check the specifications of your audio gear if you are unsure about its output level.
Although you won’t harm the A-16T or your audio devices by using an incorrect
level setting, you do want to avoid distorting the audio that passes through the A-16
system and eventually on to your monitors.
In general, you need to check the A-16T front panel Signal and Clip LEDs when
initially setting up your audio system and choosing level settings. If your -10dB
device outputs a hot level, it may be necessary to adjust the Input Level switch to
avoid clipping. In this example, moving the switch to the 0dB setting should provide
a strong signal without distortion.
The Link Switch
The A-16T Transmitter provides an easy solution for stereo input sources such as
keyboards, mixer sub-groups, drum machines, CD players, effects device outputs,
etc. The Stereo Link switch is used to turn a pair of adjacent channels into a stereo
channel that can be controlled as a single source on the Personal Mixers.
There are eight Link switches on the front panel of the A-16T. They can be used in
any combination, as your needs require. The Link switch is located between two
channels—one odd and one even. Stereo Links always affect adjacent channels (for
example, channels 1 and 2, channels 13 and 14, etc.).
The default setting, with the Link switch to the left, allows independent control of
Содержание A-16CS
Страница 6: ......
Страница 19: ...9 Rear Panel 1 2 3 1 DC power input 2 TRS Audio Inputs 3 TRS Audio Thru jacks ...
