Aviom A-16CS, Руководство пользователя

Страница: 73 / 93

Aviom A-16 Personal Monitor Mixing System
62 63
edited a mix and have not stored it to a memory location, this mix will not be recalled
when the SysEx data is loaded into the A-16R later.
Loading Presets via MIDI
The A-16R can load Presets saved as either single Preset files or as All Preset files
that include the complete set of sixteen memory locations. As when recalling a Preset
from the internal memory, you must first enter Recall Mode to load a Preset. (Recall
Mode on the A-16R is entered by pressing the
R
ECALL
button.)
Remember that you need to have MIDI cables properly connected between the A-16R
and your MIDI recording devices to load presets. Connect MIDI Out from your
storage device to MIDI In on the A-16R.
Loading One Preset via MIDI
To load a single Preset that was saved to a MIDI recording device, the A-16R must
first be placed into Recall Mode. Remember that MIDI reception is activated only
when the front panel Remote/Local switch is in the
L
OCAL
position.
While waiting for valid MIDI SysEx information, the A-16R will remain in MIDI
Recall until a valid A-16R MIDI message is received, or until you press another front
panel button to exit MIDI mode. SysEx information for other manufacturer’s devices
will pass through the A-16R and be ignored.
To load one Preset:
1. Set the A-16R Remote/Local switch to the
L
OCAL
position.
2. Press the
R
ECALL
button. The Recall button LED flashes.
3. Press the
S
OLO
button to arm the A-16R for MIDI reception. The LED
in the Solo button will blink.
4. Send the single Preset SysEx data from your MIDI storage device.
5. The Preset is loaded into internal memory and is ready to be used as is
and/or edited.
6. Save your Preset to an internal memory location.
When a SysEx transfer is complete, the system will display a status message to
confirm that the data was received properly. Two messages are possible:
• Valid Data Received - all yellow Mute LEDs will flash
• Invalid Data or MIDI Error - all red Channel LEDs will flash
Press any A-16R button to acknowledge the transfer status message and return the
A-16R to normal operation.
Loading an All Preset File via MIDI
As when loading a single Preset via SysEx, to load an All Preset data file the A-16R
must first be placed into MIDI Recall Mode.
The A-16R will remain in MIDI Recall until a valid A-16R MIDI message is received,