Aviom A-16CS Скачать руководство пользователя страница 39

Страница: 39 / 93

Aviom A-16 Personal Monitor Mixing System

When a Channel is selected, the current volume is instantly indicated on the LEDs.

When no LEDs are lit, Channel volume is at its minimum setting.

Pan and Volume Controls

To make changes to a Channel:

• Select a Channel by pressing its numbered button—the upper LED

will light.

• Rotate the

OLUME

knob to the right to increase the volume; rotate to

the left to lower the volume. The Volume LEDs indicate the current

level.

• While the Channel is still selected, you can also change the Pan

setting. Rotate the

knob left or right to change the position of the

Channel in the stereo field.

Pan LEDs

The Pan indicator is made up of five LEDs. The center LED is green. The LEDs on

either side of center are red. As you turn the

knob, the LEDs will light in various

combinations to provide the maximum number of position indicators with the fewest

number of lamps. At either end of the display only one LED will be lit to indicate that

the Channel is panned full left or right.

When using linked channels ( stereo inputs), the LEDs light in different patterns,

using a pair of LEDs on either side of the display to indicate the width of the stereo

field. When the stereo image has been collapsed to mono, only the center green LED

will be lit. In this case the stereo input will be heard as mono.

Using Solo Mode

To listen to the Channel you’re editing without hearing the rest of the current mix,

press the

OLO

button. Make any necessary changes to the Channel. When finished,

press the

OLO

button again or select any other Channel. Both methods will automati-

cally exit Solo Mode and return you to your current mix.

Note

: The status of Solo Mode is

not

saved with a Preset.

Содержание A-16CS






























































































Результаты поиска

Содержание A-16CS

Отзывы:

Похожие инструкции для A-16CS

Бренды по названию

Популярные бренды

Aviom A-16CS, Руководство пользователя

Результаты поиска

Содержание A-16CS

Отзывы:

Похожие инструкции для A-16CS

Бренды по названию

Популярные бренды