manualshive.com logo in svg

Avidyne FlightMax EX500, Руководство по установке

Поделиться
Скачать
Avidyne FlightMax EX500 Скачать руководство пользователя страница 89

 

Installation  Manual

 

P/N 600-00175-000 Rev 04

Avidyne Technical Support and Service

- 79 -

 8 Avidyne Technical Support and Service

 8.1 Technical Support

Avidyne’s web site contains information that may assist the operator and installer with questions or 
problems with their Avidyne product.

www.avidyne.com

Technical support questions may be submitted, 24 hours per day, via the following. 

Email:

[email protected]

 

Fax:

781-402-7599

 

Voice:

888-723-7592

An Avidyne Technical Support Representative will respond as soon as possible. Avidyne business 
hours are:

●

Monday through Thursday:  8:00 AM to 8:30 PM Eastern Time

●

Friday:  8:00 AM to 5:30 PM Eastern Time

Please include the part number, revision number and serial number of the unit in all correspondences. 
For problem reporting, please provide as many details associated with the problem as possible.

 8.2 Service

EX500/EX600 system service is performed at the Avidyne Service Center, and includes a complete 
checkout. 

Before you return the unit for service, contact Avidyne at 888-723-7592 to obtain a Return 
Merchandise Authorization (RMA) number.

Securely pack the unit in the original Avidyne shipping carton, write the RMA number on the outside of 
the carton, and return it to the address provided by the Avidyne Customer Service Representative.

Include your name, complete shipping address, daytime telephone number, a complete description of 
the problem, the desired return date, and shipping method.

If the original shipping carton or other suitable foam packing is not available, contact Avidyne to 
arrange for packaging materials. Avidyne is not responsible for damage due to poorly packaged 
returns.

Содержание FlightMax EX500





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды