manualshive.com logo in svg

Avidyne FlightMax EX500, Руководство по установке

Поделиться
Скачать
Avidyne FlightMax EX500 Скачать руководство пользователя страница 119

 

Installation  Manual

 

P/N 600-00175-000 Rev 04

- 109 -

Copyright

This document is applicable to Software Part Number 530-00193-() and 530-00201-().

 

Copyright © 2009 Avidyne Corporation.   All rights reserved. All trademarks and trade names are the property of their 
respective owners. All materials are copyrighted including images that represent this software. This manual has been 
provided pursuant to an agreement containing restrictions on its use. This manual is also protected by United States 
and worldwide copyright laws. No part of this manual may be reproduced or distributed, transcribed, stored in a 
retrieval system, translated into any spoken or computer language or transmitted in any form or by any means 
whatsoever without the prior written consent of:

Avidyne Corporation 

 

Lincoln Office

 

55 Old Bedford Road

 

Lincoln, MA 01773 USA

 

781-402-7400

www.avidyne.com

AVIDYNE EXCLUSIVE LIMITED WARRANTY 

and LIMITATIONS ON LIABILITY

Avidyne warrants the Product manufactured by it against defects in material and workmanship for a period of twenty-four (24) months from 
delivery. If Avidyne's Product fails to conform to this warranty, Avidyne, in its sole discretion, will either repair or replace the Product or provide a 
refund of the purchase price paid for the Product. This warranty is made upon the express conditions that:
(a) Avidyne is given prompt written notice of any claimed non-conformity in the Product, with a reasonable explanation thereof;
(b) The Product is returned to Avidyne or to an Avidyne authorized service facility;
(c) The Product has not been altered in any manner other than as previously authorized by Avidyne in writing; and
(d) Repairs to the Product have not been made by anyone other than Avidyne or an Avidyne authorized service facility.
This warranty does not apply to any Product which is not installed, maintained and operated in accordance with Avidyne's written instructions or 
which is otherwise misused, including, without limitation, to any Product which is damaged due to improper installation, maintenance or 
operation, tampering, alteration of serial numbers or other manufacturers data, lightning or other electrical source, or otherwise.
If warranty protection is applicable to the Product, Avidyne will use reasonable efforts to repair or replace Product within ten (10) business days 
of its receipt of the Product.
Any Product that has been repaired by Avidyne or replaced by Avidyne under this warranty will be subject to remainder of the original warranty 
term applicable to the repaired or replaced Product or will be warranted under the warranty terms above for ninety days from the date of repair or 
replacement, whichever period is longer.
THIS EXCLUSIVE LIMITED WARRANTY APPLIES IN LIEU OF AND EXPRESSLY SUPERCEDES AND EXCLUDES ALL OTHER 
REPRESENTATIONS, AFFIRMATIONS AND/OR WARRANTIES, WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, INCLUDING, 
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, OF TITLE AND/OR OF 
NON-INFRINGEMENT.  PURCHASER EXPRESSLY AND KNOWINGLY AGREES THAT NO OTHER REPRESENTATIONS, 
AFFIRMATIONS OR WARRANTIES, WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, FORM PART OF ANY PURCHASE AND 
SALE TRANSACTION RELATED TO THE PRODUCT.
AVIDYNE'S (AND ITS AFFILIATES') AND ANY PRODUCT COMPONENT SUPPLIER'S SOLE RESPONSIBILITY AND LIABILITY RELATED 
TO THE PRODUCT OR ARISING OUT OF OR RELATED TO ITS PURCHASE, SALE, PERFORMANCE, RELIABILITY OR USE ARE 
LIMITED TO ITS REPAIR OR REPLACEMENT, OR TO A REFUND OF THE PURCHASE PRICE, IN AVIDYNE'S SOLE DISCRETION.  IN NO 
EVENT WILL AVIDYNE (OR ITS AFFILIATES) OR ANY SUPPLIERS OF PRODUCT COMPONENTS BE RESPONSIBLE OR LIABLE FOR 
ANY OTHER DAMAGE OF ANY NATURE WHATSOEVER, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, 
LOSS OF USE, LOSS OF REVENUE OR PROFIT, PROPERTY DAMAGE, PERSONAL INJURY, WRONGFUL DEATH, OR OTHER 
DAMAGE (WHETHER OR NOT AVIDYNE (OR ITS AFFILIATES) WERE NOTIFIED OF THE POSSIBILITY THAT ANY DAMAGE MIGHT BE 
INCURRED), ARISING OUT OF OR RELATED TO THE PRODUCT, ITS PURCHASE OR SALE, ITS PERFORMANCE OR RELIABILITY, OR 
THE USE OR INABILITY TO USE THE PRODUCT, FOR ANY REASON, INCLUDING DUE TO ANY PRODUCT DEFECT OR DEFECTS OR 
ANY ACTION OR INACTION OF ANY NATURE (INCLUDING CLAIMED OR ACTUAL NEGLIGENCE OR GROSS NEGLIGENCE) BY 
AVIDYNE OR ANY SUPPLIERS OF PRODUCT COMPONENTS.  NEITHER THIS EXCLUSIVE LIMITED WARRANTY NOR AVIDYNE'S OR 

Содержание FlightMax EX500





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды