EN
43
EN
42
1 - TECHNICAL CHARACTERISTICS
The technical characteristics are provided as an indication only and for a temperature of +20°C. The
company Avidsen reserves the right to modify these characteristics at any time, while under all circumstances
guaranteeing these products’ smooth operation and the type of use intended, in an aim to improve these
products.
MOTORS
Type
24 VDC motors, reduction gear, type: telescopic
Power supply
24 VDC
Nominal force
800N
Speed at rated torque
2cm/sec
Consumption at rated strength
3A
Cable
50cm. 2 x 0.75 mm² section cables
Assigned operating duration
10 minutes
Maximum number of cycles/day
50
Operating temperature
-20°C/ +60°C
Protection rating
IP44
ELECTRONIC CONTROL BOX
Type
Electronic control box for 2 x 24 VDC motors
Contents
1 AVLO electronic card, 1 x 230 / 24 VAC transformer
Power supply
230 VAC / 50 Hz or 24 VDC
Maximum assigned power
240W
Motor output (- M1 + / - M2 +)
2 outputs for 24 VDC motor
- Maximum output current at start for 3s = 10A.
- Maximum output current after start = 10A
Flashing light output (- Warn +)
Flashing controlled by the electronic card.
For flashing light with LED, 24V/10W maximum
+24 VDC power output (+24 V/GND)
To power the photocells. 3.3W maximum
Photocell input (GND/PHO)
Input for dry contact that is normally closed
Input for control device (2B / GND) “2
panels”
Input for dry contact that is normally open (closing the
contact triggers a command to set the gate in motion or
stop it)
G - TECHNICAL AND LEGAL INFORMATION
