Avery Dennison ALS 204, Руководство по обслуживанию и установке

Страница: 179 / 224

179
9 R
EPAIR
9.1 T
ESTS
ALS
20X
256
00.08 APSF l.
(rotary encoder - length) xxxx.xx m – “Mileage counter” for rotary encoder meas-
uring wheel
– max. value depends on diameter of meas-
uring wheel
– Begins again when pulse counter reaches
its max value
00.09 APSF s.
(rotary encoder - status) Designed for factory use only
00.10 OD-A
(Sensor for pressure roller) Not used
00.11 OD-B
(Unwind unit sensor) 1 or 0 Display must change between 1 and 0 when
the unwinder is turned.
00.12 Matdiam
(OD sensor) xx.xx mm Displays the diameter of the material roll as
currently calculated
00.13 Dancer 1
Not used
00.14 Dancer 2
00.15 DancerR
(Position sensor for rewind
unit dancer arm) xxx yyy – xxx = Value of absolute dancer arm posi-
tion (??? = dancer arm not initialized). The
difference between the positive and nega-
tive value in the respective end positions is
approx. 40.
– yyy = State of the dancer arm light barriers:
0 = blocked; 1 = open
00.16 PLC-IN 00000xxx – Status display for the signal interface inputs
– The last three digits (xxx) show the status
of the three inputs PLC_IN1, PLC_IN2 and
PLC_IN3
– 1 = Signal present; 0 = no signal
00.17 MotStat Designed for factory use only
00.19 Rewdiam xxxmm – Displays the currently calculated material
roll diameter.
– Diameter calculation requires at least 2 m
of material feeding.
00.21 RewDanc xx% – Shifting of the two dancer arm encoder sig-
nals in %, related to period time.
– Can be used for encoder adjustment during
machine production.
– Rated value: > 20%
Sensor ID Name Value Test
[197] Overview for the “MACHINE SETUP > Sensor Test“