Using Add mode
3. Back of Store Operations
31
3. Back of Store Operations
Back of store operations are operations you can do with the scale that do not directly involve a
sale to a customer. These can include labelling, re-wrapping and stock management
operations. Three of the default Sales Modes: Add Mode, Stock Mode and Prepack Mode, and
some User functions, such as Consignment, are dedicated to back of the store operations. If
the back of store User functions have been configured on your machine you will be able to
access them from the User Functions screen.
Using Add mode
By default, Add mode enables you to print multiple labels for a single PLU, followed by a single
add label with totals printed on it.
The Add function can be configured to print batched labels (See
where it will print labels for multiple PLUs in a single batch. A separator label can be printed
whenever the PLU in the batch changes, and a final total label will be printed at the end of the
batch run.
To use the scale for multiple label printing:
1.
Load the labels in to the printer so that the backing paper feeds out of the printer slot.
2.
Press the print mode setup key and select the Add function.
3.
Press
and check that the print mode key shows
.
4.
Select the first PLU.
5.
Select the number of items (1).
6.
Select the number of labels (2).
7.
Press your Operator key and enter your PIN.
8.
The labels will print or, if batched printing is enabled in system settings, the PLU will be
added to the batch subtotal.
9.
Continue until all PLUs in the batch have been entered.
10. Press the subtotal key followed by your operator key to view the details of the batch.
11. Press the
button to print the labels.
