Configuration Settings
5. System Setup
46
Operational Configuration
Sets various operational configurations.
Receipt Transaction Header
The receipt heading line can be replaced with a user programmable text. The original
column headings must be disabled from Service Mode > Data Maintenance >
Network Parameters > Service Configuration > Receipt Symbols Printing = Disabled. A
new heading line should be created in System Data > Messages > Receipt > Receipt
Header Text and assign the message ID in System Setup > Configuration > General >
Receipt Transaction Header. Note formatting cannot be applied to this text.
Account Validation
Off - any account number accepted. You can enter any account reference and charge
goods or make payments to that account.
On - only known accounts allowed. You can charge goods or make payments only to
accounts that have been previously programmed in the machine.
Add Function
The Add function operates in a way similar to receipt mode, but allows individual
labels to be printed for each item with a final total label showing the total weight, and
price. The setting provides six options for the printed output.
• None.
• Label and total summary label.
• Total summary label only.
• Total summary receipt only.
• Label and total summary receipt.
• Batched label and total summary label. When this is enabled different PLUs can be
added to a batch before printing is started. A separator label (See
) can
be configured to print whenever the PLU in the batch changes.
Auto Recall Timeout
Sets the Auto Recall Timeout in seconds
Rewrap Function Control
Determines which fields from the product can be modified when a new label is
printed. The fields that can be selected are: Date 1, 2 & 3, Price and the PLU number.
Totalising
Disables or enables totalising and therefore also totals reporting.
Transaction Filter
Determines the type of transactions stored by the scale when trading.
Transaction Buffer
Selects the transaction buffer behaviour when it is full.
• Circular. New transactions overwrite the oldest transactions and trading can
continue.
• Linear. Trading cannot continue when the buffer is full. A warning message is
generated when the buffer is almost full.
Transaction Storage
Sets whether transactions are stored after totalising.
Store transactions only if they are being collected by a back office system. Transactions
storage can occupy valuable memory space and potentially slow down the scale.
Cashing Up Declaration
This only applies to Machine Totals clearing reports for period 1.
If this is enabled, the operator must enter the cash drawer contents when cashing up
before the totals are printed.
The totals reports lists the amount entered for each payment type and any
discrepancies between that value and the amount in the drawer.
Hold Receipt Function
Held receipts are stored irrespective of the transaction storage setting.
If Hold Receipt is enabled, a Place on Hold button is displayed in the subtotal screen,
which allows the operator to place the receipt on hold at a scale that is also used for
printing final receipts.
Customer Number Control
Determines how the customer numbers are generated. The number can be configured
to be auto generated by the system or for manual entry by the operator.
Self-service Non Weighed Qty Entry
Sets whether numeric keyboard opens when a non weighed item is selected.
Ingredient text area
Allows the PLU text field used for ingredients to be defined. The default value is 0. Can
be programmed with values between 1-12 to identify the text containing the
ingredients. If text area 12 is selected as the ingredients text then allergens can be
highlighted on the receipts and labels.
