133
(5) TV Out
Set the display time gap from 3 to 10 sec. before it switches to the next camera.
(6) Miscellaneous
Enable the conditions in
Miscellaneous
section you want the system to perform.
-
Beep if no signal
Make sound when the video signal is lost.
-
Mandatory Record
Always record video when software is running
-
Playback Mode
Select the mode of playback the video.
Select date and time:
Select the date and time which user wants to playback.
Play the last file:
Automatically playback the video from the last hour
Instant Playback:
Automatically playback the video which has just recorded
-
Date Format
Select the date format which wants to display in
Select date and time
playback mode
-
Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically
switches to the next video in cycle depending on the set time gap.
(7) Login
Enable the conditions in Login section you want the system to automatically carry out.
-
Auto record when login
Automatically start video recording when the NV DVR is executed.
-
Auto start Network when login
Automatically connect to network when the NV DVR is executed.
-
Login to compact mode
Switch to compact mode directly when the NV DVR is executed.
(8) POS
Set from which camera screen to display the data from the POS equipment. To set the text
flow and color format, click
Advanced
.
(9) UPS (Uninterruptible Power Supply)
Protect the system from damaging, such as power surges or brownouts. This automatically
gives time to close the NV DVR properly when the battery backup power has reached the
Shutdown when capacity below percentage level setting.
The UPS device must be connected to your computer (refer to your UPS user’s guide).
