30
2.12 Connecting an external I/O box to NV3000/5000 I/O card
i
The external I/O box is an optional item. It provides four (4) sensor input and three
(3) relay output.
Connect the male end of the D-type cable to the D-type I/O port of the I/O box and the female
end to the D-type port of the I/O card. Check the table below and locate which pinhole is
assigned to sensor input and relay output.
D-Type I/O port
AUDIO IN 1
NV3000
I/O Audio
card
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
AUDIO IN 4
NV5000
I/O Audio
card
D-type cable
2.12.1
I/O box Sensor and Relay pinhole allocation:
The signal from the sensor (i.e., infrared sensors, smoke detectors, proximity sensors, door
sensors, etc.) is being transmitted to the I/O card, and this triggers the system to respond and
send signal to relay device (i.e., alarm, telephone etc).
Pin #
Definition
1 INPUT
SIGNAL
1+
2 INPUT
SIGNAL
2+
3 INPUT
SIGNAL
3+
4 INPUT
SIGNAL
4+
5
OUTPUT 3 – Normally Closed
6 INPUT
SIGNAL
1-(GND)
7 INPUT
SIGNAL
2-(GND)
8 INPUT
SIGNAL
3-(GND)
9 INPUT
SIGNAL
4-(GND)
10
OUTPUT 3 – Common
11
OUTPUT 1 – Normally Open
12
OUTPUT 1 – Common
13
OUTPUT 2 – Normally Open
14
OUTPUT 2 – Common
15
OUTPUT 3 – Normally Open
