57
Enable
– Mark the check box to enable the System Controller function.
Model
– Select model of the System Controller.
Port
– Select the com port that is connected with the System Controller. Click
Setup
to
configure com port value. The com port value is shown in below table:
Baud rate
9600
Data bits
8
Parity
No
Stop bit
1
Flow control
No
ID
– Set an ID for DVR server (0~99). This ID is a key for communicating between the
System Controller and the DVR server.
i
When the DVR server ID is X, the DVR server can be controlled by System Controller
irrespective of the DVR ID that is selected in System Controller.
(9) System Configuration
To configure the DVR system date, time and IP address.
Date/Time Setup
1. Select the
Time Zone
of DVR server located
2. Select the
Month
and
Date
. Click arrow button can switch to different month.
3. Adjust the
Time
by click spin box arrow button.
