AVer IWH5000 Series, Руководство пользователя

Страница: 198 / 247

190
- In Audio Detection , click the camera number to the system to alarm when detect the
abnormal voice.
5. In (4) Sensor , select and click on the sensor number (use

and

to select the sensor) to
set the condition for the system to alarm. If the sensor normal status is high, set the sensor
condition to low.
- Continue trigger duration: Set a time period that when sensor has been trigger and
stay in the same status for that period, then the alarm will be sent out.
- Abnormal Event: Enable/disable to set the condition of the event for system to alarm.

System Reboot: when the DVR system reboot without abnormal condition, the
system will send out the alarm message.

Abnormal Reboot: when the DVR system reboot in irregular condition, the system
will send out the alarm message.

Recording is switched off: when the recording has been stopped, the system will
send out the alarm message.

Network is switched off: when the network connection of DVR system is lost, the
system will send out the alarm message.

Hard Disk failed:
when the hard disk can’t work normally, the system will send out
the alarm message.