Avaya Scopia XT Executive Скачать руководство пользователя страница 67

Страница: 67 / 108

Chapter 5: Recording Meetings

About this task

You can record meetings to a locally connected USB storage device or the network. This section

describes how to start, pause, or stop a recording during a videoconference.

You can view recordings from the local USB storage device either on the XT Series or using any

standard media player. The system saves the file as an MP4, and records the video in H.264 format

with audio in AAC-LC format. You can view recordings saved to the network via the Scopia

Desktop Web Portal (see

User Guide for Avaya Scopia

Desktop Client

If using a USB device to record a videoconference hosted by your built-in MCU, up to six remote

endpoints can join the meeting (if your license is MCU 9). If your license is MCU 4, up to three

remote endpoints can join. If more remote endpoints already joined, you cannot start a recording.

Important:

Any recordings you make are not authorized by the manufacturer and are made at the sole

responsibility and liability of the user.

Recorded videoconferences use one monitor only. During recording, the auxiliary monitor displays

the same video layout as the primary monitor.

Before you begin

• To record to a local USB storage device, insert it in the lower USB port on the XT Series. Use a

USB storage device formatted with FAT32, EXT2, EXT3, EXT4. Other formats, even if

supported, are not recommended.

Figure 66: Connecting a USB drive to the XT Series

• To record to the network, your Scopia

Solution must include a recording server, the XT Series

must be managed by Scopia

Management, and the meeting must be hosted by an external

Scopia

Elite MCU (or an older model). The endpoint must be accessible remotely by Scopia

Management with its address in the remote access settings (see

Deployment Guide for Avaya

Scopia

XT Series

). For more information, contact your system administrator.

April 2015

Avaya Scopia

XT Series User Guide

Comments? [email protected]

Содержание Scopia XT Executive













































































































Результаты поиска

Содержание Scopia XT Executive

Отзывы:

Avaya Scopia XT Executive, Руководство пользователя, Страница: 67 / 108

Результаты поиска

Содержание Scopia XT Executive

Отзывы: