14. Select
Configuration
>
Network
from the menu.
15. Deselect
DHCP
.
16. Consult the
Customer Lifecycle Workbook
for the PDU IPv4 address information.
17. Use the information from the workbook to configure the IPv4 address options of the PDU.
18. Click
Apply
.
19. Select
Configuation
>
SNMP/Thresholds
from the menu.
20. Change the
GET Community (Read-Only)
field to
avaya123
.
21. Change the
SysName
field to
Sentry3_SMART_PDU_#_type
where
#
is the PDU number
and
type
is either
MAIN
or
EXT
. MAIN denotes a PDU in a main Avaya Pod Fx and EXT
denotes a PDU in an extension Avaya Pod Fx.
Examples
PDU 2 on a main Avaya Pod Fx would be labelled
Sentry3_SMART_PDU_2_MAIN
.
PDU 1 on an extention Avaya Pod Fx would be labelled
Sentry3_SMART_PDU_1_EXT
.
22. Change the
SysLocation
field to
Main Pod
or
Extension Pod
depending on the
installation type.
23. Click
Apply
.
24. Select
Tools
>
Restart
from the menu.
25. Select
Restart
from the dropdown list.
26. Click
Apply
.
27. Click
OK
.
The PDU will now restart.
28. Disconnect the Ethernet cable used to connect the laptop to the PDU.
29. Connect the PDU to the correct port on the switch. See the
Customer Lifecycle Workbook
for
port information.
30. Use the browser provided with the MSC to connect to the PDU management software.
31. Log into the management software to confirm connectivity.
32. Repeat these steps for the next PDU if more than one requires configuration.
Related links
Checklist for replacing a Power Distribution Unit
on page 53
Checklist for replacing a Power Distribution Unit
October 2017
Troubleshooting the Avaya Pod Fx
™
57