manualshive.com logo in svg

Avaya Pod Fx, Руководство по устранению неисправностей, Страница: 40 / 66

Поделиться
Скачать
Avaya Pod Fx Скачать руководство пользователя страница 40

5. Click the 

Ports

 tab.

6. Click 

vSwitch

,

7. Click 

Edit

.

8. Change the MTU value to 1500 if it is not already configured to that value.
9. Click 

OK

.

10. Click the 

Ports

 tab.

11. Click 

Management Network

.

12. Click 

Edit

.

13. Change the MTU value to 1500 if it is not already configured to that value.
14. Click 

OK

.

15. Repeat steps 1–14 for all hosts in the cluster.
16. Right-click the cluster and attempt to configure High Availability.

Verify the MTU settings of the Avaya Virtual Services Platform 4850GTS switches if you continue to

encounter issues with High Availability configuration. Both devices must be configured to have an

MTU setting of 1950 to ensure proper operation.

1. Connect to the switch.
2. Enter Global Configuration mode.

enable

configure terminal

3. Display the current switch MTU setting.

show sys mtu

4. Change the MTU setting to 1950 if it is not already that value.

sys mtu 1950

5. Confirm the new MTU setting.

show sys mtu

6. Save the new configuration.

save config

7. Repeat steps 1–6 for all applicable Avaya Virtual Services Platform 4850GTS switches.

Related links

Troubleshooting software issues

 on page 34

Troubleshooting software issues

October 2017

Troubleshooting the Avaya Pod Fx

™

40

Comments on this document? [email protected]

Содержание Pod Fx



































































Отзывы:

Нет отзывов