Apr-09
95
Avantes
www.avantes.com
4.7
AvaLight-D(H)S(-BAL) (Balanced) Deuterium Halogen Light Source
Safety Instructions
Warning:
All warnings on the unit and in the operating instructions should be adhered to.
Unpacking Instructions:
Your package should contain:
1 – AvaLight- D(H)S-(BAL) (Balanced) Deuterium-Halogen light source
1 - Power Cord
1 - This manual
1 – Safety goggles
1)
Unpack your deuterium lamp carefully. Although the deuterium lamp is rigidly mounted
dropping this instrument can cause permanent damage.
2)
Inspect the outside of the instrument and make sure that there is no damage to your unit. In
case of damage contact the dealer immediately and DO NOT USE THE INSTRUMENT!
3)
Use this instrument in a clean laboratory environment.
Moisture
The unit is designed for operation in dry rooms only.
Ventilation
The unit should be situated so that its location or position does not interfere with its proper
ventilation.
Heat
The unit should be situated away from radiators, hot bodies, ovens or other heat sources and
direct sun radiation.
Power Sources
The unit should be connected to a power supply only of the type as marked on the unit.
Object and Liquid Entry
Care should be taken that objects do not fall, or liquids spilled into the enclosure through
openings.
Caution:
This lamp produces ultra violet radiation, which can be harmful to the eyes. DO NOT LOOK INTO THE
LIGHT BEAM. THIS CAN CAUSE PERMANENT EYE DAMAGE - WEAR PROTECTIVE EYE WEAR - USE THE
SUPPLIED SAFETY GOGGLES
.
Do not use this device in clinical situations.
Disconnect power before opening housing or replace Fuse.
The installation category for this equipment is Class 2, it is not permitted to connect
equipment to the AvaLight-DHS with a power supply without SELV or class II qualification.
