80
Apr-09
Avantes
www.avantes.com
4.1
AvaLight-HAL Tungsten Halogen light source
Parts Included
1.
AvaLight-HAL Halogen Light source
2.
The AvaLight-HAL Operating manual
3.
PS-24V/1.25A 100-240VAC power supply (should have been ordered separately)
Starting up
1.
Plug in the PS-24V power supply .
2.
Plug in the connector of the power supply into the socket of AvaLight-HAL.
3.
Connect the SMA-connectors of your fibers to the SMA-plug
4.
Switch on the Halogen lamp with the switch.
PS-24VDC power supply
Settings for high power or long lifetime
The AvaLight-HAL is factory set for optimal power output (medium setting), with an internal jumper
the optical energy can be controlled (see table).
Jumper setting
Optical output
Color temperature
Exp. Lifetime
LOW
70%
Ca. 2.700K
> 2.000 hrs.
MEDIUM (default)
100%
Ca. 2.850K
1.000 hrs
HIGH
150%
Ca. 3.000K
< 1.000 hrs.
The internal jumper settings can be changed, please follow instructions:
1.
Remove screw protection caps on the backside
2.
Loosen 2 screws with philips screwdriver
3.
remove backplane
4.
take out electronics board
5.
Adjust jumper settings according to scheme below
6.
put back electronics board, be carefull not to pinch the electrical wires
7.
put back backplane, screws and screw protection caps
SMA plug
24V Power supply
On-Off switch
Screw caps
Jumper JP1
