Table of Contents
Interfacing Voyage Data Recorder Systems, AutroSafe Interactive Fire-Alarm System, 116-P-BSL336/EE, RevA 2007-01-25,
Autronica Fire and Security AS
Page 2
6.
Configuring BSL
_
336 .......................................................20
6.1
Settings on the Panel Front............................................................... 20
6.2
Service-Computer-Based Configuration ........................................... 20
6.3
The Service port commands ............................................................. 21
6.3.1
Syntax ..................................................................................... 21
6.3.2
List of commands.................................................................... 21
6.4
#ShowCfg - Show Configuration ....................................................... 22
6.5
#EraseCfg - Erase Config ................................................................. 22
6.6
#CfgBaud - Set Baud Rates.............................................................. 22
6.7
#CfgPeriod - Set Reporting Periods.................................................. 23
6.8
#CfgTalker - Set Talker Identification................................................ 23
7.
Testing BSL
_
336...............................................................24
7.1
#dm0x10 – Trace AutroCom and VDR Messages............................ 24
7.2
#DoAlive – Send Alive Event ............................................................ 24
7.3
#DoStatus – Send Periodic System Status....................................... 25
8.
Log Strings........................................................................26
8.1
String Definition ................................................................................. 26
8.1.1
Talker Identifier ....................................................................... 26
8.1.2
Equipment Indicators/numbers ............................................... 26
8.1.3
ALA —System Faults.............................................................. 29
8.1.4
DOR — Door Status Detection ............................................... 29
8.1.5
EVE — General Event Message ............................................ 32
8.1.6
FIR – Fire Detection................................................................ 37
8.1.7
Periodic Report ....................................................................... 39
8.2
Testing Output with HyperTerminal................................................... 41
8.3
Testing the Final Setup ..................................................................... 43
9.
Reader’s Comments .........................................................45
