Log Strings
Interfacing Voyage Data Recorder Systems, AutroSafe Interactive Fire-Alarm System, 116-P-BSL336/EE, RevA 2007-01-25,
Autronica Fire and Security AS
Page 38
Message type
Condition,
Acknowledg
e
Comment
E – event, Fire Alarms
A,V
There is no condition V "non-activation" for fire
alarms. Non-activation is implicit in an "Operator
RESET" event.
"Acknowledged" occurs only on Detection Zone
level.
F – Fault
X,,
Detector state unknown
D - Disablement
X,,
Detector state unknown
Note that even if events FIR,F and FIR,D contain "unknown" detector
status, a separate FIR,E event will follow that has an updated detector
status (if the detector is non-normal).
Field 3, Detector types:
The detector types defined for AutroSafe 3.5 have been mapped to
the following codes.
If it's important to know the exact type of detector, use the UnitId and
cross-reference to the AutroSafe Configuration Handbook.
ID
Comment
FD
Generic fire detector
FH
Heat detector
FS
Smoke detector
FD
Smoke and heat detector
FM
Manual call point
GD
Any gas detector
GO
Oxygen gas detector
GS
Hydrogen sulphide gas detector
GH
Hydro-carbon gas detector
SF
Sprinkler flow switch
SV
Sprinkler manual valve release
CO
CO
2
manual release
OT
Other
Field 7, description text:
Description text
Comment
Fire EarlyWrn:
Early Warning – only on panel display
Fire PreAlarm:
Pre-Alarm – only on panel display
Fire Alarm :
Alarm – activates Alarm Zones (bells) and Fire Protection Equipment
