27
Out-Vehicle Test
Out-vehicle Test is used to test the condition of batteries that are not connected to a vehicle.
This function aims to check the health status of the battery only. The compatible battery types
and standards are as follows:
Types:
FLOODED, AGM, AGM SPIRAL, EFB, and GEL
Standards:
CCA, SAE, CA, EN, EN2, IEC, DIN, JIS, MCA, BCI, and GB
5.1 Test Procedure
1.
Connect the battery tester clamps to the battery terminals.
2.
Select the appropriate battery type, rating standard, and CCA value. Tap
Next
to
continue. The Visual inspection screen will display if visual inspection is enabled in
Settings
; otherwise, the out-vehicle test results will display.
Figure 5-1
Sample Out-vehicle Test Screen
3.
The test results will display in a few seconds.
