107
This may happen when you are in an area with low signal strength. Turn off your device
if not in use.
C.
When you cannot turn on the tablet:
Make sure the tablet is connected to a power source or the battery is charged.
D.
When you are unable to charge the tablet:
Your charger maybe out of order. Contact your local distributor for assistance.
You may be attempting to use the device in an overly hot/cold temperature. Charge the
device in a cooler or warmer area.
Your device may have not been connected to the charger properly. Check the connector.
NOTE
If the problems persist, please contact the Autel technical support personnel or your local
distributor.
20.3 About Battery Usage
Your tester is powered by a built-in Lithium-ion Polymer battery. This means that, unlike other
forms of battery technology, you can recharge your battery while some charge remains without
reducing your tester’s autonomy due to the “battery memory effect” inherent in those
technologies.
DANGER
1.
The built-in Lithium-ion Polymer battery is factory replaceable only; incorrect
replacement or tampering with the battery pack may cause an explosion.
2.
Do not use a damaged battery charger.
Do not disassemble or open, crush, bend or deform, puncture or shred.
Do not modify or remanufacture, attempt to insert foreign objects into the battery,
expose to fire, explosion or other hazards.
Make sure to use the charger and USB cables that come together in the package only.
If you use the other charger and USB cables, you might incur malfunction or failure of
the device.
Only use the charging device that has been qualified with device per the standard.
Use of an unqualified battery or charger may present a risk of fire, explosion, leakage,
or other hazards.
Avoid dropping the tester. If the tester is dropped, especially on a hard surface, and
the user suspects damage, contact support.
The battery recharging time varies depending on the remaining battery capacity.
Battery life inevitably shortens over time.
Since over charging may shorten battery life, remove the tester from its charger once
it is fully charged. Unplug the charger once charging is complete.
Leaving the tester in hot or cold places, especially inside a car in summer or winter,
may reduce the capacity and life of the battery. Always keep the battery within normal
temperatures.
