10.1.6.
Operate to position via push buttons of the local controls
To operate to a position via push buttons of the local controls, status indication
S0017
must be shown (refer to <Indications in the display>).
Figure 71: Status indication of multiport valve (selector switch in position OFF)
Operation in clockwise or counterclockwise direction:
When changing the selector switch to position Local control (LOCAL), the display
changes:
Figure 72: Status indication of multiport valve (selector switch in position LOCAL)
As a consequence, the valve can be operated into clockwise or counterclockwise
direction (display shows CW or CCW)
Direct operation to a position:
When selector switch is in position 0 (OFF), the function “Direct operation to a position
via push buttons” is activated via
->STEP
(push button ) (display shows
->JOG
).
Figure 73: Status indication of multiport valve (selector switch in position OFF)
When changing the selector switch to position Local control (LOCAL), the display
changes for selection of the desired position:
Figure 74: Status indication of multiport valve (selector switch in position LOCAL)
Select the desired position (P1, P2, ...) via push buttons
and confirm selection
via
Ok
(push button ).
→
The operation is issued as soon as push button
Ok
is pressed.
63
SAVEx 07.2 – SAVEx16.2/SARVEx 07.2 – SARVEx16.2 Control unit: electronic (MWG)
ACVExC 01.2 Non-Intrusive
Commissioning (basic settings)
