manualshive.com logo in svg

AUMA SARVEx 07.2, Руководство по эксплуатации

Поделиться
Скачать
AUMA SARVEx 07.2 Скачать руководство пользователя страница 20

6.

Fit multi-turn actuator on the valve stem so that the stem nut dogs engage into
the output drive sleeve.

Figure 14:

➥

The flanges are flush with each other if properly engaged.

7.

Adjust multi-turn actuator until alignment of the fixing holes.

8.

Fasten multi-turn actuator with screws [3].

9.

Fasten screws [3] crosswise with a torque according to table.

Table 10:

Tightening torques for screws

Tightening torque [Nm]

Threads

Strength class A2-80/A4–80

24

M8

48

M10

200

M16

392

M20

10. Turn multi-turn actuator with handwheel in direction OPEN until valve flange

[4] and output drive type A [2] are firmly placed together.

Figure 15:

11. Tighten screws [5] between valve and output drive type A crosswise applying

a torque according to table.

20

SAVEx 07.2 – SAVEx16.2/SARVEx 07.2 – SARVEx16.2 Control unit: electronic (MWG)

Assembly

ACVExC 01.2 Non-Intrusive

Содержание SARVEx 07.2





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды