manualshive.com logo in svg

AUMA SARVEx 07.2, Руководство по эксплуатации

Поделиться
Скачать
AUMA SARVEx 07.2 Скачать руководство пользователя страница 21

5.3.2.2. Stem nut for output drive type A: finish machining

This working step is only required if stem nut is supplied unbored or with pilot bore.

Information

For exact product version, please refer to the order-related technical data sheet or
the AUMA Assistant App.

Figure 16: Output drive type A

[1]

Stem nut

[2]

Axial needle roller bearing

[2.1] Axial bearing washer

[2.2] Axial needle roller and cage assembly

[3]

Spigot ring

Procedure

1.

Remove spigot ring [3] from output drive.

2.

Remove stem nut [1] together with axial needle roller bearings [2].

3.

Remove axial bearing washers [2.1] and axial needle roller and cage assemblies
[2.2] from stem nut [1].

4.

Drill and bore stem nut [1] and cut thread.

5.

Clean the machined stem nut [1].

6.

Apply sufficient Lithium soap EP multi-purpose grease to axial needle roller and
cage assemblies [2.2] and axial bearing washers [2.1], ensuring that all hollow
spaces are filled with grease.

7.

Place greased axial needle roller and cage assemblies [2.2] and axial bearing
washers [2.1] onto stem nut [1].

8.

Re-insert stem nut [1] with axial needle roller bearings [2] into output drive.

9.

Screw in spigot ring [3] until it is firm against the shoulder.

21

SAVEx 07.2 – SAVEx16.2/SARVEx 07.2 – SARVEx16.2 Control unit: electronic (MWG)
ACVExC 01.2 Non-Intrusive

Assembly

Содержание SARVEx 07.2





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды