Industrial Managed
Ethernet Switch – EH9711
User Manual
Page
39
of
223
Field Label
Description
can be used for an administrator account, privilege level 10 for a standard user account
and privilege level 5 for a guest account.
There is also a hyperlink to Add/Edit User in each username. Users can also click
Add New User
button to add a new user.
After clicked, the webpage in Figure 2.27 will be shown. Table 2.18 summarizes the descriptions of the Add User webpage.
Figure 2.28 shows an example of Edit User webpage.
Figure 2.27 Webpage to Configure Security Switch Users – After Clicked
Add New User
Button
Table 2.18
Descriptions of Users Configuration – After Clicked
Add New User
Button
Label
Description
Factory Default
Username
A string identifying the user name that this entry should belong to.
The allowed string length is
1
to
31
. The valid user name allows
letters, numbers and underscores.
NULL
Password
The password of the user. The allowed string length is
0
to
31
. Any
printable characters including space is accepted.
NULL
Password (again)
Re-enter the password for the user.
NULL
Privilege Level
The privilege level of the user. The allowed range is
0
to
15
. If the
privilege level value is 15, it can access all groups, i.e., that is granted
the fully control of the device. But other values need to refer to each
group privilege level. User's privilege should be same or greater than
the group privilege level to have the access of that group. By default
setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system
maintenance (software upload, factory defaults and etc.) need user
privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account
and privilege level 5 for a guest account.
0
Figure 2.28 Webpage to Edit User
