Atop EH9711 Series Скачать руководство пользователя страница 169

Страница: 169 / 223

Industrial Managed
Ethernet Switch – EH9711

User Manual

Page

169

223

Table 3.10 Monitoring Descriptions of Detailed Port Statistics

The port select box determines which port is affected by clicking the buttons.

Check the

Auto-refresh

box to refresh the page automatically. Automatic refresh occurs every 3 seconds. Click

Clear

button

to clear the counters for all ports. Click

Refresh button

to refresh the page immediately

3.2.6

Name Map

This webpage provides interface name to port number mapping. Many Web pages use a port number to express an interface,

whereas Command Line Interface (CLI) uses interface names. The table shown in Figure 3.16 provides a means to convert

from one to the other.

Figure 3.16 Webpage to Name Map

Label

Description

Receive Total and Transmit Total
Rx and Tx Packets

The number of received and transmitted (good and bad) packets.

Rx and Tx Octets

The number of received and transmitted (good and bad) bytes. Includes FCS, but excludes
framing bits.

Rx and Tx Unicast

The number of received and transmitted (good and bad) unicast packets.

Rx and Tx Multicast

The number of received and transmitted (good and bad) multicast packets.

Rx and Tx Broadcast

The number of received and transmitted (good and bad) broadcast packets.

Rx and Tx Pause

A count of the MAC Control frames received or transmitted on this port that have an opcode
indicating a PAUSE operation.

Receive and Transmit Size Counters

The number of received and transmitted (good and bad) multicast packets.

Receive and Transmit Queue Counters

The number of received and transmitted (good and bad) broadcast packets.

Receive Error Counters
Rx Drops

The number of frames dropped due to lack of receive buffers or egress congestion.

Rx CRC/Alignment

The number of frames received with CRC or alignment errors.

Rx Undersize

The number of short frames received with valid CRC. Short frames are frames that are
smaller than 64 bytes.

Rx Oversize

The number of long frames received with valid CRC. Long frames are frames that are longer
than the configured maximum frame length for this port.

Rx Fragments

The number of short frames received with invalid CRC. Short frames are frames that are
smaller than 64 bytes.

Rx Jabber

The number of long frames received with invalid CRC. Long frames are frames that are
longer than the configured maximum frame length for this port.

Rx Filtered

The number of received frames filtered by the forwarding process.

Tx Drops

The number of frames dropped due to output buffer congestion.

Tx Late/Exc. Coll.

The number of frames dropped due to excessive or late collisions.

Содержание EH9711 Series
































































































































































































































Результаты поиска

Содержание EH9711 Series

Отзывы:

Бренды по названию

Популярные бренды

Atop EH9711 Series, Руководство пользователя

Результаты поиска

Содержание EH9711 Series

Отзывы:

Бренды по названию

Популярные бренды