ATN Thermal Entry Wizard Скачать руководство пользователя

Страница: 21 / 56

6.6. IMPORT AND EXPORT DATA

On the Transfer page, you can export the event, the user data, the user pic-

ture, and the captured picture to the USB flash drive . You can also import the

user data and the user picture from the USB flash drive .

6.6.1. Export Data

Steps

1 . Tap Transfer on the Home page to enter the Transfer page .
2 . On the Transfer page, tap Export Event, Export User Data, Export Profile

Photo, and export captured picture .

3 . Tap Yes on the pop-up page and the data will be exported from the device

to the USB flash drive .

NOTE

The supported USB flash drive format is DB.
The system supports the USB flash drive with the storage of 1 GB to 32

GB. Make sure the free space of the USB flash drive is more than 512 MB.

The exported user data is a DB file, which cannot be edited.

6.6.2. Import Data

Steps

1 . Plug a USB flash drive in the device .
2 . On the Transfer page, tap Import User Data, and Import Profile Photo .
3 . Tap Yes on the pop-up window and the data will be imported from the USB

flash drive to the device .

NOTE

If you want to transfer all user information from one device (Device A)

to another (Device B), you should export the information from Device A to

the USB flash drive and then import from the USB flash drive to Device B.

In this case, you should import the user data before importing the profile

photo.

The supported USB flash drive format is FAT32.
The imported pictures should be saved in the root directory (enroll_

pic) and the picture file’s name should be follow the rule below:

Card No._Name_Department_Employee ID_Gender.jpg

The employee ID should be less than 32 characters. It can be a com-

bination of lower letters, upper letters, and numbers. It should not be

duplicated and should not start with 0.

Requirements of face picture should follow the rules below: It should

be taken in full-face view, directly facing the camera. Do not wear a hat or

head covering when taking the face picture. The format should be JPEG

or JPG. The resolution should be 640

480 pixel or more than of 640

480

pixel. The picture size should be between 60 KB and 200 KB.

6.7. IDENTITY AUTHENTICATION

After network configuration, system parameters configuration and user con-

figuration, you can go back to the initial page for identity authentication . The

system will authenticate person according to the configured authentication

mode .

You can authenticate identity via 1:1 matching or 1:N matching .

1:N Matching

Compare the captured face picture with all face pictures stored in the device .

1: 1 Matching

Compare the captured face picture with all face pictures stored in the device .

6.7.1. Authenticate via Multiple Credential

Before You Start

Set the user authentication type before authentication . For details, see Set

Authentication Mode .

Steps

1 . If the authentication mode is Card and Face, Password and Face, Card

and Password, authenticate any credential according to the instructions

on the live view page .

NOTE

The card can be normal Mifare card, or encrypted card.
If the QR Code Scanning function is enabled, you can put the QR code

in front of the device camera to authenticate via QR code.

2 . After the previous credential is authenticated, continue authenticate oth-

er credentials .

NOTE

For detailed information about authenticating face, see Tips When Col-

lecting/Comparing Face Picture.

If authentication succeeded, the prompt “Authenticated” will pop up .

6.7.2. Authenticate via Single Credential

Set the user authentication type before authentication . For details, see Set

Authentication Mode . Authenticate face, card or QR code .

Face

Face forward at the camera and start authentication via face .

Card

Present the card on the card presenting area and start authentication via

card .

NOTE

The card can be normal Mifare card, or encrypted card.

QR Code

Put the QR code in front of the device camera to authenticate via QR code .

NOTE

Authentication via QR code should be supported by the device.

If authentication completed, a prompt “Authenticated” will pop up .

Содержание Thermal Entry Wizard

























































Результаты поиска

Содержание Thermal Entry Wizard

Отзывы:

Похожие инструкции для Thermal Entry Wizard

Бренды по названию

Популярные бренды

ATN Thermal Entry Wizard, Руководство пользователя

Результаты поиска

Содержание Thermal Entry Wizard

Отзывы:

Похожие инструкции для Thermal Entry Wizard

Бренды по названию

Популярные бренды