Atlona OmniStream AT-OMNI-121 Скачать руководство пользователя страница 108

Страница: 108 / 139

AT-OMNI-121 / AT-OMNI-122

108

The AMS Interface

HDMI Output page

The

HDMI Output

tab provides options to configure the output streams.

Name

The name used by AMS to identify the HDMI output.

Enabled

Click this toggle switch to enable or disable scrambling on the decoder. When enabled, the toggle switch will be

green.

Key

Enter the scrambling key in this field. The scrambling key must be ASCII and must contain a minimum of eight

characters. Special characters and spaces are not permitted.

Encrypted

Indicates if the content is HDCP-encrypted or not. If true, then HDCP content is being passed in to the decoder and

this indicator will be colored green.

Supported Version

Click this drop-down list to select the desired HDCP version. If set to none, then the sink is reported as “non-

compliant” and will receive non-HDCP content.

Input

Description

none

The decoder will receive non-HDCP content.

1.4

The decoder will receive HDCP version 1.4 content.

2.2

The decoder will receive HDCP version 2.2 content.

Negotiated Version

The version of HDCP being received.

Output

Содержание OmniStream AT-OMNI-121












































































































































Результаты поиска

Содержание OmniStream AT-OMNI-121

Отзывы:

Похожие инструкции для OmniStream AT-OMNI-121

Бренды по названию

Популярные бренды

Atlona OmniStream AT-OMNI-121, Руководство пользователя

Результаты поиска

Содержание OmniStream AT-OMNI-121

Отзывы:

Похожие инструкции для OmniStream AT-OMNI-121

Бренды по названию

Популярные бренды