ATLAS North America Proprietary
Sea Scan® ARC Explorer™ Manual
1 of 1
Page: 32
Issue: 4.2.1
2SFT1-0001
Manual
·
Lift the back of the depressor wing up, rotating it toward the front of the tow fish until it stops.
This will allow access to the forward tow rail screw. Ensure alignment with the front top center
index marks and tighten the forward tow rail screw using a 3/16" hex key driver.
WARNING:
Hold the wing assembly up during the next steps to prevent it from falling, possibly
causing personal injury.
Figure 44: Lift the Wing and Tighten the Front Tow Rail Screw
·
Reinstall the Tow Fish Safety Release on the tow rail in the third position from the rear. Follow
the removal procedure in reverse order.
Figure 45: Reinstall the Tow Fish Safety Release
·
Rotate the depressor wing down and reinstall the lower rear depressor wing tow rail screw using a
5/32" hex key driver.
