ATLAS North America Proprietary
Sea Scan® ARC Explorer™ Manual
1 of 1
Page: 25
Issue: 4.2.1
2SFT1-0001
Manual
To remove the transducers, simply loosen the rear bolt with the provided wrench.
Figure 30: Screw removal to access a transducer
Using the thumb grooves, grab the transducer with both hands, lifting the back of the transducer out
first and then sliding the front out from under the spacer lip. The back is where the transducer
connects to the towfish body, so it might need a good pull to come loose.
Figure 31: Thumb grooves for transducer removal
At this time, double check that both of the transducer connectors are clean and clear of debris and
that the O-Ring is in its proper place.
Figure 32: Towfish transducer connection & Transducer Connection
