Athena 1090 EVO, Перевод оригинальной инструкции, Страница: 181 / 182

181
6.2.1 Checking and tightening screws, bolts, plug ring nuts
_______________________ 117
6.2.2 Visual and structural inspection
__________________________________________ 118
6.2.3 Damage to tubes and cables
______________________________________________ 118
6.2.4 Greasing the runners
____________________________________________________ 119
6.2.5 Greasing the nylon wheels of the platform extension
_______________________ 120
6.2.6 Checking the hydraulic tank oil level and topping up if necessary
_____________ 121
6.2.7 Hydraulic reservoir oil change
____________________________________________ 123
6.2.8 Checking the operation of the maximum pressure valves
____________________ 124
6.2.9 Battery
________________________________________________________________ 125
6.2.9.1 General warnings
__________________________________________________________ 125
6.2.9.2 Maintenance
______________________________________________________________ 126
6.2.9.3 Recharging
________________________________________________________________ 126
6.2.9.3.1 Charging method No. 1 with 12V battery charger ________________________________ 126
6.2.9.3.2 Charging method No. 2 using the 230V plug in the ladder _________________________ 127
6.2.9.3.3 Charging method No. 3 using the internal combustion engine ______________________ 128
6.2.10 Hydraulic filter replacement
___________________________________________ 129
6.2.10.1 Suction filters replacement
_________________________________________________ 129
6.2.10.2 Replacement of return filter
________________________________________________ 130
6.2.11 Checking the operation of the frame angle sensor
________________________ 132
6.2.12 Checking the operation of the scissor angle sensor
_______________________ 133
6.2.13 Checking the operation of the Proactive levelling redundant angle sensor
___ 134
6.2.14 Checking the differential circuit breaker
________________________________ 135
6.2.15 Electrical insulation monitoring device operation test
____________________ 136
6.2.16 Manual emergency device operation test
________________________________ 137
6.2.17 Checking the operation of the “ Proactive levelling ” safety valves
__________ 138
6.2.18 Checking the seal of the cylinder balancing valves
________________________ 139
6.2.19 Procedure with remote controller for checking the seal of the cylinder balancing
valves
141
6.2.20 Maintenance of the engine
_____________________________________________ 143
6.2.21 Track inspection and tensioning
________________________________________ 153
6.2.22 Checking the tracks for wear
__________________________________________ 154
6.2.23 Replacing the tracks
__________________________________________________ 155
6.2.24 Track reduction gear oil level inspection
________________________________ 157
7 DEMOLITION _________________________________________________________________ 158
7.1 M
ACHINE LIFE
_______________________________________________________________ 158
7.2 D
ECOMMISSIONING AND DEMOLITION
_______________________________________________ 158