Athena 1090 EVO, Перевод оригинальной инструкции, Страница: 87 / 182

87
The key-switch functions are:
•
(CENTRAL): Machine off - electrical system not powered
•
(RH POSITION): The whole electrical system of the platform starts, including
the mobile push-button panel in the work platform. The ground controls are
excluded.
•
(LH POSITION): The whole electrical system of the platform starts. The
ground controls are automatically enabled and the push-button panel in the
work platform is disabled.
Then the control unit will begin to check the safety systems:
•
On the console, the lights 1-2-3-4 will turn on, together with a beeping sound
•
The lights will flash
•
Once the check is complete and the machine is in the transport position and
levelled, only the lights 2-3 must stay on and the beeping must stop.
Once the check-control cycle has terminated, the engine can be started:
•
Turn selector no.5 to the right (OFF) holding it in place for 10 seconds (if
necessary); this will activate the glow plugs
•
After 10 seconds, you will hear a beep; at this point turn the selector to the
left (ON).