Athena 1090 EVO, Перевод оригинальной инструкции, Страница: 119 / 182

119
6.2.4 Greasing the runners
Grease these parts at the frequency indicated in the general chart and EACH
TIME that the following operations are performed:
•
Washing the machine
•
After a long period of inactivity
•
After use in particularly harsh conditions, e.g. damp or dusty places,
marine environments, etc.
The surfaces to be greased are those in contact with the runners, both in the
frame and under the work platform (see figures below):
Remove all dirt from the parts before greasing.
Use grease type
PAKELO BEARING EP 2 or equivalent.
Warning: The correct cleaning and greasing of these surfaces is essential to
correctly measure the load on the work platform. If these operations are not
performed correctly, the load may be measured incorrectly with potential risks
to the operators.