20
© 2019, ATEÏS, member of PAX ProAV Group
for power saving purpose.
8/9. EVAC & Fault contacts output:
EVAC contact: This contact is closed if the system is under EVAC paging.
Fault contact: This contact is open if a system or major fault is detected.
10. Remote console (RJ45):
The remote port allows the paging consoles or accessories to be connected to BTQ-SG8/SL8.
The BTQ-SG8 contains two sockets, and BTQ-SL8 contains one.
Each remote port on BTQ-SG8/SL8 unit can address up to 8 DPM-MAIN remote consoles in
daisy-chain or up to 16 units in redundant loop using 2 ports (BTQ-SG8 only).
Max. remotes per BTQ-SG8: 16
Max. remotes per BTQ-SL8: 8
Max. distance between remote units: 250m (shielded RJ45 connector, STP CAT5/6).
11. USB 2.0:
Connect a USB flash drive on BTQ-SG8 for external storage of music/message files and
playback (G.711, G.722, G.726, G.727, MP3 and WAV) .
12. Ethernet connector:
Connect the BTQ-SG8 unit to Ethernet network.
13. Global net link/Digi-link:
Global net: The global network (redundant loops) is used to link the BTQ-VM4/8 controller to
the next connected BTQ-VM4/8 or BTQ-SG8 units. It supports both RJ45 plug and fiber-
optics.
o
Max. global-net units: 64
o
Max. distance between global-net units: 100m (STP CAT5/6), 2 km (multi mode ber optic)
and 20 km (single mode ber optic).
Digi-link port (RJ45): The local digi-link network is used to link the BTQ-VM4/8 controller and
BTQ-SL8 secondary units together.
o
Max. local-net units: 32
o
Max. distance between local-net units: 10m (shielded RJ45 connector, STP CAT5/6).
14. RS232:
This port is used to connect to 3rd party device for controlling the BOUTIQUE system.
15. 24VDC out:
The 24VDC (max. 0.8A) power is shared by the two 24VDC outputs on BTQ-SG8/SL8 and the
remote consoles.
If the BTQ-SG8/SL8 is connected to an external 24VDC power supply such as connect to
the battery charger, then the max. current will be 1.3A.
16/17. Amp In1/Amp In2:
There are two outputs which can output the balanced 0 dB audio channel to two individual
external power amplifiers.
18. Device DIP ID:
When connecting multiple secondary units with BTQ-VM4/8 controller, the device ID can identify
the connection among the units.
