AT AT-LA500, Руководство пользователя

Страница: 97 / 98

AT
Note:
Search
In the
bus or, for a single signal, a rising edge or a falling edge.
To activate the search option, click on the
wil
In the
where to search a specified value.
In the
The menu ring allows selecting the start location for searching. Possible options are:
Depending on the signal type selected in the
contains different options.
If a single signal is selected, the
The
AT-LA500 – U
SER MANUAL
Note: Exporting the entire acquisition may require a long time to be completed.
Search
In the State Listing
bus or, for a single signal, a rising edge or a falling edge.
To activate the search option, click on the
will be opened, and search criteria can be entered.
In the Search
where to search a specified value.
In the
Value
The menu ring allows selecting the start location for searching. Possible options are:
From Start:
From End:
From Trigger:
Master Marker:
Depending on the signal type selected in the
contains different options.
If a single signal is selected, the
The
Compare
SER MANUAL
Exporting the entire acquisition may require a long time to be completed.
State Listing window, as in the Waveform View, it is possible to search a value related to a
bus or, for a single signal, a rising edge or a falling edge.
To activate the search option, click on the
l be opened, and search criteria can be entered.
Search list, all defined signals and bus are shown. It is possible to select the signal or bus
where to search a specified value.
Value box, the value or the edge to search can be entered.
The menu ring allows selecting the start location for searching. Possible options are:
From Start:
From Trigger:
Master Marker:
Depending on the signal type selected in the
contains different options.
If a single signal is selected, the
0
1
HiZ
Rise
Fall
Change
Compare menu ring allows to sel
Exporting the entire acquisition may require a long time to be completed.
window, as in the Waveform View, it is possible to search a value related to a
bus or, for a single signal, a rising edge or a falling edge.
To activate the search option, click on the
l be opened, and search criteria can be entered.
list, all defined signals and bus are shown. It is possible to select the signal or bus
where to search a specified value.
box, the value or the edge to search can be entered.
The menu ring allows selecting the start location for searching. Possible options are:
Search starts from the acquisition begin;
Search starts from the acquisition end;
Search starts from the trigger position;
Search starts from the master market;
Depending on the signal type selected in the
contains different options.
If a single signal is selected, the Value
HiZ
Rise
Fall
Change
menu ring allows to sel
Exporting the entire acquisition may require a long time to be completed.
window, as in the Waveform View, it is possible to search a value related to a
bus or, for a single signal, a rising edge or a falling edge.
To activate the search option, click on the Search Settings
l be opened, and search criteria can be entered.
list, all defined signals and bus are shown. It is possible to select the signal or bus
box, the value or the edge to search can be entered.
The menu ring allows selecting the start location for searching. Possible options are:
Search starts from the acquisition begin;
Search starts from the acquisition end;
Search starts from the trigger position;
Search starts from the master market;
Depending on the signal type selected in the Search
Value box can assume these values:
Search for a logic 0;
Search for a logic 1;
Search for a High Impedance (only for
Pattern Generator Mode);
Search for a rising edge;
Search for a falling edge;
Search for any edge;
menu ring allows to select between the search option:
Exporting the entire acquisition may require a long time to be completed.
window, as in the Waveform View, it is possible to search a value related to a
bus or, for a single signal, a rising edge or a falling edge.
Search Settings
l be opened, and search criteria can be entered.
list, all defined signals and bus are shown. It is possible to select the signal or bus
box, the value or the edge to search can be entered.
The menu ring allows selecting the start location for searching. Possible options are:
Search starts from the acquisition begin;
Search starts from the acquisition end;
Search starts from the trigger position;
Search starts from the master market;
Search list, the
box can assume these values:
Search for a logic 0;
Search for a logic 1;
Search for a High Impedance (only for
Pattern Generator Mode);
Search for a rising edge;
Search for a falling edge;
Search for any edge;
ect between the search option:
Exporting the entire acquisition may require a long time to be completed.
window, as in the Waveform View, it is possible to search a value related to a
key and the Search Settings window
list, all defined signals and bus are shown. It is possible to select the signal or bus
box, the value or the edge to search can be entered.
The menu ring allows selecting the start location for searching. Possible options are:
Search starts from the acquisition begin;
Search starts from the acquisition end;
Search starts from the trigger position;
Search starts from the master market;
list, the Compare
box can assume these values:
Search for a logic 0;
Search for a logic 1;
Search for a High Impedance (only for
Pattern Generator Mode);
Search for a rising edge;
Search for a falling edge;
Search for any edge;
ect between the search option:
Exporting the entire acquisition may require a long time to be completed.
window, as in the Waveform View, it is possible to search a value related to a
key and the Search Settings window
list, all defined signals and bus are shown. It is possible to select the signal or bus
The menu ring allows selecting the start location for searching. Possible options are:
Compare and the Value
Search for a High Impedance (only for
AT-LA
NAVIGATOR
window, as in the Waveform View, it is possible to search a value related to a
key and the Search Settings window
list, all defined signals and bus are shown. It is possible to select the signal or bus
The menu ring allows selecting the start location for searching. Possible options are:
Value menu ring
NAVIGATOR
window, as in the Waveform View, it is possible to search a value related to a
key and the Search Settings window
list, all defined signals and bus are shown. It is possible to select the signal or bus
menu ring