AT AT-LA500 Скачать руководство пользователя страница 54

Страница: 54 / 98

The

To make active the selected criteria, click the
closed.

In the
key. The

AT-LA500

–

SER MANUAL

The

Compare

To  make  active  the  selected  criteria,  click  the
closed.

In the visualization window,
key. The master cursor

SER MANUAL

Compare

menu ring allows

•

HiZ

To make active the selected criteria, click the

visualization window,

master cursor will move to the

menu ring allows to select

Find if equal

Find if not equal

Find greater values
selected)

Find minor values (enabled only if a bus is
selected)

HiZ

High Impedance (only for Pattern Generator
Mode);

To make active the selected criteria, click the

visualization window, click on the

will move to the

select between

Find if equal;
Find if not equal;
Find  greater  values
selected);
Find  minor  values  (enabled  only  if  a  bus  is
selected);
High  Impedance  (only  for  Pattern  Generator
Mode);

To make active the selected criteria, click the

click on the

Search Forward

will move to the next found value.

between the search option:

Find greater values (enabled only if a bus is

Find minor values (enabled only if a bus is

High Impedance (only for Pattern Generator

To make active the selected criteria, click the

button and the

Search Forward

found value.

the search option:

(enabled only if a bus is

Find minor values (enabled only if a bus is

High Impedance (only for Pattern Generator

and the

Search Settings

Search Forward

key or on the

(enabled only if a bus is

Find minor values (enabled only if a bus is

High Impedance (only for Pattern Generator

Search Settings

key or on the

Search Backward

window will be

Search Backward

window will be

Search Backward

Содержание AT-LA500



































































































Результаты поиска

Содержание AT-LA500

Отзывы:

Бренды по названию

Популярные бренды

AT AT-LA500, Руководство пользователя

Результаты поиска

Содержание AT-LA500

Отзывы:

Бренды по названию

Популярные бренды