AT AT-LA500 Скачать руководство пользователя

Страница: 73 / 98

Signal Definition

This panel allows defining a list of signals or bus and choosing their correspondence to the channels
of the AT
Only the signals defined in this panel can be viewed in the
The right table shows all the AT

Add a signal

To add a signal to the list, write the desired name in the

between signal name and channel. It is also possible to select the desired channel row and click the
<
Both these methods can be used also to chang

Add a bus

To add a bus to the list, write the desired name in the
button. Then select the rows of the channels that will form the bus in the right table. Click on the <

AT-LA500

–

SER MANUAL

Signal Definition

This panel allows defining a list of signals or bus and choosing their correspondence to the channels
of the AT-LA500
Only the signals defined in this panel can be viewed in the
The right table shows all the AT

Add a signal

To add a signal to the list, write the desired name in the

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the
<

button.

Both these methods can be used also to chang

Add a bus

To add a bus to the list, write the desired name in the
button. Then select the rows of the channels that will form the bus in the right table. Click on the <

button to add all selected signals to the bus.

SER MANUAL

Signal Definition

This panel allows defining a list of signals or bus and choosing their correspondence to the channels

LA500 Digital Pattern Generator.

Only the signals defined in this panel can be viewed in the
The right table shows all the AT

Add a signal

To add a signal to the list, write the desired name in the

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the

button.

Both these methods can be used also to chang

Add a bus

To add a bus to the list, write the desired name in the
button. Then select the rows of the channels that will form the bus in the right table. Click on the <

tton to add all selected signals to the bus.

Signal Definition

This panel allows defining a list of signals or bus and choosing their correspondence to the channels

Digital Pattern Generator.

Only the signals defined in this panel can be viewed in the
The right table shows all the AT-LA500

To add a signal to the list, write the desired name in the

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the

Both these methods can be used also to chang

To add a bus to the list, write the desired name in the
button. Then select the rows of the channels that will form the bus in the right table. Click on the <

tton to add all selected signals to the bus.

This panel allows defining a list of signals or bus and choosing their correspondence to the channels

Digital Pattern Generator.

Only the signals defined in this panel can be viewed in the

LA500 channels and the colors of the correspondent wires.

To add a signal to the list, write the desired name in the

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the

Both these methods can be used also to change any previously defined correspondence.

To add a bus to the list, write the desired name in the
button. Then select the rows of the channels that will form the bus in the right table. Click on the <

tton to add all selected signals to the bus.

This panel allows defining a list of signals or bus and choosing their correspondence to the channels

Only the signals defined in this panel can be viewed in the

channels and the colors of the correspondent wires.

To add a signal to the list, write the desired name in the

Bus or Signal Name

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the

e any previously defined correspondence.

To add a bus to the list, write the desired name in the

Bus or Signal Name

button. Then select the rows of the channels that will form the bus in the right table. Click on the <

This panel allows defining a list of signals or bus and choosing their correspondence to the channels

Only the signals defined in this panel can be viewed in the Digital Editor

channels and the colors of the correspondent wires.

Bus or Signal Name

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the

e any previously defined correspondence.

Bus or Signal Name

button. Then select the rows of the channels that will form the bus in the right table. Click on the <

This panel allows defining a list of signals or bus and choosing their correspondence to the channels

Digital Editor or Data Editor w

channels and the colors of the correspondent wires.

Bus or Signal Name

box and click on the

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the

e any previously defined correspondence.

Bus or Signal Name

box and click on the

button. Then select the rows of the channels that will form the bus in the right table. Click on the <

This panel allows defining a list of signals or bus and choosing their correspondence to the channels

or Data Editor windows.

channels and the colors of the correspondent wires.

box and click on the

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the

e any previously defined correspondence.

box and click on the

button. Then select the rows of the channels that will form the bus in the right table. Click on the <

This panel allows defining a list of signals or bus and choosing their correspondence to the channels

indows.

box and click on the

button. then double click on the desired channel row of the right table to set the correspondence

between signal name and channel. It is also possible to select the desired channel row and click the

box and click on the

button. Then select the rows of the channels that will form the bus in the right table. Click on the <

Содержание AT-LA500



































































































Результаты поиска

Содержание AT-LA500

Отзывы:

Похожие инструкции для AT-LA500

Бренды по названию

Популярные бренды

AT AT-LA500, Руководство пользователя

Результаты поиска

Содержание AT-LA500

Отзывы:

Похожие инструкции для AT-LA500

Бренды по названию

Популярные бренды