AT AT-LA500 Скачать руководство пользователя

Страница: 57 / 98

Note

the

Note

automatically shown. They can’t be removed from the

In the
it to open a bus. The icon of an opened bus becomes
The

The
icon.
To resize the

Cursors

Cursors
recognized or found easier.

On the left side of the
identified by the

AT-LA500

–

SER MANUAL

Note

: Signals can be added in (removed from) the

the

icon in the

Note

: When the trigger is set on a serial protocol mode, the signal protocol names are

automatically shown. They can’t be removed from the

In the State Listing
it to open a bus. The icon of an opened bus becomes
The

Samples

icon.

The

Time

column contains the progressive absolute time of every sample. It is indicated by the

icon.
To resize the

Cursors

Cursors  (also  called  markers)
recognized or found easier.

On  the  left  side  of  the
identified by  the

SER MANUAL

Signals can be added in (removed from) the

icon in the State Listing

hen the trigger is set on a serial protocol mode, the signal protocol names are

automatically shown. They can’t be removed from the

State Listing, a bus is indicated by a

it to open a bus. The icon of an opened bus becomes

Samples

column contains the progressive number of the acquired s

column contains the progressive absolute time of every sample. It is indicated by the

To resize the columns amplitude, just drag the line between signals name.

(also called markers)

recognized or found easier.

On the left side of the
identified by the

icon. All relative positions will be calculated respected to the position of the

Signals can be added in (removed from) the

State Listing window toolbar

hen the trigger is set on a serial protocol mode, the signal protocol names are

automatically shown. They can’t be removed from the

, a bus is indicated by a

it to open a bus. The icon of an opened bus becomes

column contains the progressive number of the acquired s

column contains the progressive absolute time of every sample. It is indicated by the

amplitude, just drag the line between signals name.

(also called markers) are useful to identify and enlighten data that, therefore, may

recognized or found easier. In addition cursors can be use

On the left side of the State Listing

icon. All relative positions will be calculated respected to the position of the

Signals can be added in (removed from) the

window toolbar

hen the trigger is set on a serial protocol mode, the signal protocol names are

automatically shown. They can’t be removed from the

, a bus is indicated by a

icon on the left of its name. It is possible to click on

it to open a bus. The icon of an opened bus becomes

column contains the progressive number of the acquired s

column contains the progressive absolute time of every sample. It is indicated by the

amplitude, just drag the line between signals name.

are useful to identify and enlighten data that, therefore, may

In addition cursors can be use

State Listing window are listed all available cursors. The mast

icon. All relative positions will be calculated respected to the position of the

Signals can be added in (removed from) the State Listing

window toolbar.

hen the trigger is set on a serial protocol mode, the signal protocol names are

automatically shown. They can’t be removed from the State Listing

icon on the left of its name. It is possible to click on

it to open a bus. The icon of an opened bus becomes

. Click on it to close a bus.

column contains the progressive number of the acquired s

column contains the progressive absolute time of every sample. It is indicated by the

amplitude, just drag the line between signals name.

are useful to identify and enlighten data that, therefore, may

In addition cursors can be used to measure and to analyze acquired data.

window are listed all available cursors. The mast

icon. All relative positions will be calculated respected to the position of the

Listing window at any time

hen the trigger is set on a serial protocol mode, the signal protocol names are

State Listing window.

icon on the left of its name. It is possible to click on

lick on it to close a bus.

column contains the progressive number of the acquired samples. It is indicated by the

column contains the progressive absolute time of every sample. It is indicated by the

amplitude, just drag the line between signals name.

are useful to identify and enlighten data that, therefore, may

d to measure and to analyze acquired data.

window are listed all available cursors. The mast

icon. All relative positions will be calculated respected to the position of the

window at any time

hen the trigger is set on a serial protocol mode, the signal protocol names are

window.

icon on the left of its name. It is possible to click on

lick on it to close a bus.

amples. It is indicated by the

column contains the progressive absolute time of every sample. It is indicated by the

amplitude, just drag the line between signals name.

are useful to identify and enlighten data that, therefore, may

d to measure and to analyze acquired data.

window are listed all available cursors. The mast

icon. All relative positions will be calculated respected to the position of the

window at any time by clicking on

hen the trigger is set on a serial protocol mode, the signal protocol names are

icon on the left of its name. It is possible to click on

amples. It is indicated by the

column contains the progressive absolute time of every sample. It is indicated by the

are useful to identify and enlighten data that, therefore, may

d to measure and to analyze acquired data.

window are listed all available cursors. The master cursor is

icon. All relative positions will be calculated respected to the position of the

by clicking on

hen the trigger is set on a serial protocol mode, the signal protocol names are

icon on the left of its name. It is possible to click on

amples. It is indicated by the

column contains the progressive absolute time of every sample. It is indicated by the

are useful to identify and enlighten data that, therefore, may be

d to measure and to analyze acquired data.

er cursor is

icon. All relative positions will be calculated respected to the position of the

Содержание AT-LA500



































































































Результаты поиска

Содержание AT-LA500

Отзывы:

Похожие инструкции для AT-LA500

Бренды по названию

Популярные бренды

AT AT-LA500, Руководство пользователя

Результаты поиска

Содержание AT-LA500

Отзывы:

Похожие инструкции для AT-LA500

Бренды по названию

Популярные бренды